Digitaalne nurgamõõtja magnetiga

Description of the product

Electronic protractor designed to quickly and accurately measure the angle between two planes . Particularly useful when setting machines, e.g. the angle of the disc in table saws. The device has a large, clear, backlit display . The HOLD function allows you to keep the current measurement on the display. The REF function allows you to zero the protractor at any position and perform a reference measurement. The meter is equipped with a magnet placed in the base, which makes it much easier to perform measurements on steel elements.

Characteristic:

• the ability to make quick and accurate measurements
• high measurement resolution of 0.01°
• the measurement is performed with an accuracy of 0.1°
• HOLD function allows you to keep the current measurement on the display
• The REF function allows you to zero the protractor at any position and perform a reference measurement
• automatically turns off the device after approx. 3 minutes
• 4 measurement units: degrees, slope in %, mm/m, in/ft
• the protractor base is equipped with a magnet making it easier to take measurements on steel elements

Technical Specifications:

Rated voltage: 3V dc

Power supply: 2 x AAA battery (not included)

Range of the measured angle: 4×90°C

Measurement resolution: 0.05°

Accuracy of the measured angle: 0.1°

Reference measurement: yes, ZERO/REF function

Saving the current measurement on the display: yes, HOLD function

Operating temperature: 0 – 40°C